BIS ISI Mark Registration for Gypsum Plaster Boards – Coated/ Laminated Gypsum Plaster Boards IS 2095 (Part 2): 2022

If you manufacture coated or laminated gypsum plaster boards in India or you import and sell them. Then you cannot ignore BIS certification under IS 2095 (Part 2): 2022

This is not a branding exercise. It is not a marketing decision. It is a legal requirement

Since the notification of the Gypsum-based Building Materials (Quality Control) Order by the Government of India specified gypsum products must comply with the relevant Indian Standard and carry the ISI mark issued by the Bureau of Indian Standards (BIS) before they can be sold in the Indian market

If your product falls under coated or laminated gypsum plaster boards IS 2095 (Part 2): 2022 is the applicable standard

First Confirm That Your Product Falls Under Part 2 

IS 2095 is divided into different parts. Not every gypsum board is covered under the same section.

Part 2 specifically applies to coated or laminated gypsum plaster boards. These are boards that have a surface finish such as paper, vinyl, foil, or decorative lamination bonded to the gypsum core.

If you are manufacturing plain boards without coating, that is a different classification.

Before starting any BIS process confirm your product’s category properly. Misclassification is one of the most common reasons applications get delayed

You can verify the standard details through the Bureau of Indian Standards official portal and published standard lists.

Why Certification Is Mandatory

The requirement flows from the Quality Control Order (QCO) issued under the Bureau of Indian Standards Act 2016

Once a product is brought under a QCO:

• It cannot be manufactured for sale without BIS certification
• It cannot be imported without BIS licence
• It must bear the Standard Mark (ISI mark)
• Non-compliance can lead to seizure, penalties or prosecution

There is no “grace selling period” after enforcement. Once the order applies to your product category, certification must be in place before market placement

This is clearly laid out in official notifications relating to gypsum-based building materials.

Read More BIS ISI Mark Registration for Gypsum Plaster Boards – Reinforced Gypsum Plaster Boards and Ceiling Tiles IS 2095 (Part 3):2022

What BIS Actually Evaluates Under IS 2095 (Part 2): 2022 

Many manufacturers assume BIS is only concerned with dimensions and thickness. That’s incomplete.

Under IS 2095 (Part 2): 2022, evaluation typically includes:

• Dimensional tolerances
• Mechanical strength parameters
• Surface characteristics
• Bonding quality of laminate/coating
• Moisture-related performance
• Marking and labelling requirements

Beyond product testing, BIS evaluates your manufacturing controls. Certification is not only about passing a lab test it is about demonstrating consistent production capability.

The Real Registration Process – Step by Step 

Here’s what you will practically go through.

1. Prepare Your Manufacturing and Technical Documentation 

Before you even think about filing the application, gather:

• Factory registration documents
• GST and company incorporation details
• Manufacturing process flow
• Raw material details
• In-house quality control procedures
• List of testing equipment
• Calibration records

If these documents are incomplete or inconsistent, BIS will raise queries.

2. Product Testing in a BIS-Recognised Laboratory 

Your coated or laminated gypsum board must be tested in a BIS-recognised laboratory.

You cannot rely on internal test reports alone.

Samples are tested against parameters defined in IS 2095 (Part 2): 2022. If any parameter fails, corrective action is required and testing may need to be repeated.

Do not rush this stage. Many applications get delayed because manufacturers send unprepared samples.

3. Filing Application Under Scheme-I (ISI Mark Scheme) 

The application is filed online through the official BIS portal under the ISI certification scheme.

You submit:

• Application form
• Test reports
• Technical file
• Details of manufacturing unit
• Prescribed government fees

Accuracy is critical. Product name, specification, and test report description must match exactly.

4. Factory Inspection by BIS Officials 

After preliminary scrutiny, BIS schedules a factory inspection.

This is not symbolic.

• Inspecting officers verify:
• Production process
• Raw material storage
• In-house testing capability
• Quality control records
• Calibration certificates
• Traceability systems

If you claim to test flexural strength internally they will check whether you actually have the equipment and records

Preparation before inspection makes a major difference.

5. Grant of Licence and ISI Mark Usage 

If everything is in order documentation, test reports, inspection BIS grants the licence.

You will receive:

• A unique CM/L number
• Approval to use the ISI mark
• Defined product scope

Only products manufactured at the approved factory and conforming to the standard can bear the mark.

Read More BIS ISI Mark Registration for Glass Fibre Reinforced Gypsum Panels IS 17400:2021

After Certification: What You Must Continue Doing 

Certification is not permanent immunity.

BIS conducts surveillance audits. They may draw market samples. They may inspect again.

If non-conformity is found:

• Licence can be suspended
• Licence can be cancelled
• Legal action may follow

You must maintain ongoing compliance especially calibration and internal testing records.

Conclusion 

If you manufacture or import coated or laminated gypsum plaster boards covered under IS 2095 (Part 2): 2022 BIS ISI certification is not optional in 2026

You must complete testing, documentation, inspection and licensing before placing the product in the Indian market. The Quality Control Order makes this a legal compliance obligation

If you want structured professional handling of your BIS ISI mark registration Agile Regulatory can guide you through the process from documentation to licence grant and beyond

Taking the right steps now protects your business from disruption later.