BIS Registration in Domestic Electric Clothes Washing Machines IS 302 (Part 2/Sec 7): 2010
Page Contents (7)
You don’t think about safety when you press the “start” button on a washing machine. It’s expected to work. Quietly. Reliably. Without risk.
But if you are the one manufacturing or importing that machine, the responsibility sits with you.
Electrical appliances especially something as common as a washing machine can become dangerous if they are not built and tested properly. That is exactly why India does not allow these products to be sold freely without certification.
If your product falls under domestic electric clothes washing machines, you are required to comply with BIS certification under IS 302 (Part 2/Sec 7): 2010. This is not optional. It is a regulatory requirement tied directly to safety.
Why BIS Certification Matters for Washing Machines
A washing machine looks simple from the outside. Inside, it’s a different story motors, wiring, heating elements, water exposure, and moving parts all working together.
Now combine electricity and water in one appliance. That’s where risk begins.
This is exactly why the Bureau of Indian Standards enforces strict rules for such products. The goal is straightforward: reduce hazards and ensure that every unit sold in the market meets a minimum safety benchmark.
Under IS 302 (Part 2/Sec 7): 2010, washing machines must meet defined safety requirements before they can be sold in India.
Understanding IS 302 (Part 2/Sec 7): 2010
This standard focuses on safety. Not marketing claims. Not performance features. Safety.
It applies to domestic electric clothes washing machines operating within specified voltage limits generally up to 250V for single-phase appliances and higher for other configurations.
The scope is wide enough to include machines used in homes and similar environments, even if they are installed in shared or semi-commercial spaces.
What does it actually check?
Things like:
- Protection against electric shock
- Resistance to moisture
- Heating limits
- Stability and endurance
- Safe operation under stress conditions
It does not cover industrial machines or appliances used in hazardous environments.
BIS Registration in Corrugated and Semi – Corrugated Asbestos Cement Sheets IS 459:1992
Get Free Consultation!
Mandatory BIS Certification Scheme for These Products
If your washing machine falls under this category, certification is compulsory.
The government has issued Quality Control Orders (QCOs) that make BIS certification mandatory for domestic washing machines.
That means:
- You cannot manufacture without certification
- You cannot import without certification
- You cannot sell or distribute without certification
To get approval, you must apply under the BIS Product Certification Scheme (ISI Mark Scheme).
Once approved, your product must carry the ISI mark.
There is no workaround here. Non-compliance can lead to penalties, product seizure, or complete restriction from the market.
Also worth noting implementation timelines have been defined, with phased deadlines for large, small, and micro enterprises.
Step-by-Step Process for BIS Registration
The process looks straightforward on paper. In reality, it depends heavily on how prepared you are.
You start with your manufacturing setup. If your facility cannot consistently produce compliant units, certification will not move forward.
Next comes the application. You submit technical details, product specifications, and manufacturing information to BIS.
After that, your product is tested in a BIS-recognized laboratory. This is the stage where most issues show up.
If the sample fails testing, the process pauses.
If it passes, BIS may conduct a factory inspection. They verify whether your production process matches what you claimed.
Only after both testing and inspection are cleared does the certification get issued.
And even then, compliance doesn’t end. BIS expects consistency in every batch you produce.
BIS Registration for Range Hoods IS 302 (Part 2/Sec 31): 2009
Documents Required for BIS Certification
This part is usually underestimated.
You will need:
- Business registration documents
- Manufacturing unit details
- Product specifications
- Test reports
- Quality control procedures
But more importantly, you need clarity.
Your documentation must reflect how your product is made and how quality is maintained. If there are gaps or inconsistencies, the application slows down.
Common Challenges Faced During BIS Certification
Most problems are predictable.
Testing failures are common. If your product does not meet safety requirements, you go back and fix it.
Documentation issues are another major factor. Incomplete or unclear submissions slow down approvals.
Then comes consistency. Passing one test is not enough. Your manufacturing process must produce the same result every time.
Factory inspections can also reveal gaps especially if your actual setup differs from what you submitted.
None of this is unusual. But ignoring these factors early on creates delays later.
Conclusion
If you want to make or bring washing machines into India, you need to get BIS certification under IS 302 (Part 2/Sec 7): 2010. Don't take this lightly.
It has a direct link to safety, compliance and access to the market
Testing, verification and ongoing quality control are all parts of the process. It takes more than just filling out paperwork
Having the right help can help you avoid delays and move through the process quickly.
Agile Regulatory can help you get ready for BIS registration walk you through the process, and lower the risk of mistakes that slow things down.
About the Author
View ProfileNishi Chawla
Content Writer & Compliance Specialist
Nishi is an expert content writer with expertise in Business Legal Compliances, Certifications, and Registrations — BIS, EPR, Medical Devices, Cosmetics, Drugs, and Import Export. She holds a B.Com from the University of Delhi and has been writing industry content since 2019.
